Analysis of the effect of ventilation bars on the packing structure of sinter bed by DEM simulation

研究成果: Article査読

抄録

The effect of ventilation bars on the porosity of a sinter bed charged on a sinter machine was investigated. The behavior of the sinter feed was calculated by discrete element method (DEM) simulation. By taking into account the adhesion force, the sinter feed in the wet state was represented and the simulation parameters were determined to reproduce the experimental values of the angle of repose. The porosity of the sinter bed was calculated, and the mechanism of the formation of the packing structure and the cause of the distribution of porosity in each region were clarified. As a result, it is shown that in the case of shear flow, the higher the powder pressure during flow, the higher the porosity.

本文言語English
論文番号3836
ジャーナルEnergies
13
15
DOI
出版ステータスPublished - 2020 8

ASJC Scopus subject areas

  • 再生可能エネルギー、持続可能性、環境
  • エネルギー工学および電力技術
  • エネルギー(その他)
  • 制御と最適化
  • 電子工学および電気工学

フィンガープリント

「Analysis of the effect of ventilation bars on the packing structure of sinter bed by DEM simulation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル