Analysis of Heat Transfer on Turbine Moving Blades Using microstructural changes due to Aging

Takanari Okamura, Akinori Koga, Yoshihiro Aburatani, Yomei Yoshioka, Kazunari Fujiyama, Nagatoshi Okabe

研究成果: Article査読

2 被引用数 (Scopus)

抄録

This paper presents the evaluation of heat transfer rate on the surface of turbine moving blades based on their microstructural changes due to aging. γ′ strengthen nickel base superalloy are used extensively in turbine moving blades. The aging effect on the change of γ′ precipitates is investigated. The average diameter of γ′ precipitates increases linearly with time raised to the one-third power for aging temperature. The metal temperature of turbine moving blades used in gas turbine field operations could be estimated by applying the above method. Also, its temperature is obtained numerically from the heat transfer rates which are calculated using some analytical methods. By comparison of both metal temperatures, the heat transfer rates on the surfaces of turbine moving blades used in gas turbine field operations are estimated and are evaluated.

本文言語English
ページ(範囲)1085-1092
ページ数8
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series B
61
583
DOI
出版ステータスPublished - 1995 1 1
外部発表はい

ASJC Scopus subject areas

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Analysis of Heat Transfer on Turbine Moving Blades Using microstructural changes due to Aging」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル