All-solid-state micro lithium-ion batteries fabricated by using dry polymer electrolyte with micro-phase separation structure

Hiroyuki Nakano, Kaoru Dokko, Jun ichi Sugaya, Tomoyuki Yasukawa, Tomokazu Matsue, Kiyoshi Kanamura

研究成果: Article査読

47 被引用数 (Scopus)

抄録

Micro-batteries were fabricated by using BAB block copolymer as dry polymer electrolyte, which consisted of polyethylene oxide and polystyrene and had relatively high ionic conductivity at room temperature. The micro-batteries were fabricated by a sol-gel method combined with micro-injection system. Two types of micro-battery were fabricated. One consists of a single cell and another of 3-cells connected in series. LiMn2O4 and Li4/3Ti5/3O4 were used as active materials in positive and negative electrode, respectively. The micro-array batteries were operated at room temperature without any plasticizer in the polymer electrolyte. The operation voltages were 2.45 V and 7.40 V for a single cell and 3-cell array, respectively. The discharge capacities estimated from cyclic voltammetry measurements were 245 nA h for a single cell and 12.1 nA h for a 3-cell array, which corresponded to the energy densities of 8.48 μW h cm-2 and 4.54 μW h cm-2, respectively.

本文言語English
ページ(範囲)2013-2017
ページ数5
ジャーナルElectrochemistry Communications
9
8
DOI
出版ステータスPublished - 2007 8

ASJC Scopus subject areas

  • Electrochemistry

フィンガープリント 「All-solid-state micro lithium-ion batteries fabricated by using dry polymer electrolyte with micro-phase separation structure」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル