Al-modified mesoporous silica for efficient conversion of methanol to dimethyl ether

Jérémy Faye, Atsushi Takahashi, Mickaël Capron, Pascal Fongarland, Franck Dumeignil, Tadahiro Fujitani

研究成果: Article査読

8 被引用数 (Scopus)

抄録

The aim of this work was to design efficient mesoporous heterogeneous catalysts for the reaction of conversion of methanol to dimethyl ether (DME). Mesostructured silica and aluminosilicate solids were synthesized using an original synthesis procedure enabling the elaboration of structurally homogeneous solids at atmospheric pressure and using a food grade templating agent. The prepared solids consisted of mesoporous silica and aluminosilicates with aluminium contents of 0.76, 1.11 and 1.60 wt%. These solids were characterized by XRD, N2-physisorption and TEM. Their efficiency in the catalytic reaction of conversion of methanol to DME was subsequently correlated with their structural and acidic properties. The sample exhibiting a pore diameter of 2.2 nm for a Si/Al ratio of 27 showed remarkable performances with a methanol conversion as high as 80% at 598 K (7.5 vol% MeOH; 50 mg of catalyst; GHSV = 26,000 cm3 h-1 g-1) and a total selectivity to DME.

本文言語English
ページ(範囲)5895-5902
ページ数8
ジャーナルRSC Advances
3
17
DOI
出版ステータスPublished - 2013 5月 7
外部発表はい

ASJC Scopus subject areas

  • 化学 (全般)
  • 化学工学(全般)

フィンガープリント

「Al-modified mesoporous silica for efficient conversion of methanol to dimethyl ether」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル