A sensor selection method considering communication delays

Shingo Kagami, Masatoshi Ishikawa

研究成果: Article査読

2 被引用数 (Scopus)

抄録

In connection with the method of selecting among sensors connected by a network those sensors that can efficiently acquire information on the object, this paper presents a discussion in a form that explicitly treats the existence of communications delay when the information is received via a network. First, we propose a calculation algorithm that is scalable with respect to the increase in the number of the sensors when the information from several sensors is combined by a Kalman filter and the communications delay is taken into account. When several sensors have different communications delays and these delays change so that the sensor information arrival is unrelated to the actual time, the information is correctly combined. Next, we propose a method for selecting an appropriate sensor when state estimation by this algorithm is performed. This method makes use of the cross-information previously used as a reference for sensor selection. However, the reduction of the information content due to communications delay, affecting the estimated value for the present time, can be expressed quantitatively. These algorithms are verified by numerical experiments and their effectiveness is demonstrated.

本文言語English
ページ(範囲)21-31
ページ数11
ジャーナルElectronics and Communications in Japan, Part III: Fundamental Electronic Science (English translation of Denshi Tsushin Gakkai Ronbunshi)
89
5
DOI
出版ステータスPublished - 2006 5月
外部発表はい

ASJC Scopus subject areas

  • 電子工学および電気工学

フィンガープリント

「A sensor selection method considering communication delays」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル