A Review on Chatter in Robotic Machining Process Regarding Both Regenerative and Mode Coupling Mechanism

Lei Yuan, Zengxi Pan, Donghong Ding, Shuaishuai Sun, Weihua Li

研究成果: Article査読

35 被引用数 (Scopus)

抄録

During the last few decades, industrial robots have been widely used in various applications to develop a flexible and efficient manufacturing process such as material handling and welding. However, as a high value-added application, few robotic machining systems have been installed mainly due to the limitation from the chatter, which leads to the poor product quality and low productivity. Although researchers have been continuously investigating the robotic machining chatter, there is still a lack of understanding due to the complexity of the issue. This paper provides a comprehensive review on chatter-related issues during robotic machining tasks, including mechanisms, mitigation strategies, and identification methods regarding both regenerative chatter and mode coupling chatter. Due to the low stiffness and couple structure of industrial robots, both regenerate and mode coupling chatter can occur at different cutting conditions. The difference between two chatter mechanism in the robotic machining process are compared and a list of guidelines is provided to help in distinguishing these two types of chatter. Systemic analysis of the mechanisms of the chatter identification and suppression is presented providing a research basis for future studies.

本文言語English
論文番号8430609
ページ(範囲)2240-2251
ページ数12
ジャーナルIEEE/ASME Transactions on Mechatronics
23
5
DOI
出版ステータスPublished - 2018 10
外部発表はい

ASJC Scopus subject areas

  • 制御およびシステム工学
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学

フィンガープリント

「A Review on Chatter in Robotic Machining Process Regarding Both Regenerative and Mode Coupling Mechanism」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル