A new multiprobe method of roundness measurements

I Ko, Satoshi Kiyono, Tadatoshi Nomura

研究成果: Article査読

91 被引用数 (Scopus)

抄録

This paper presents a new multiprobe method for roundness measurements called the mixed method. In this method, displacements at two points on a cylindrical workpiece and an angle at one of the two points are simultaneously monitored by two probes. The differential output of the probes cancels the effect of the spindle error, and deconvolving the differential data yields the correct roundness error. The mixed method is compared to the traditional 3-point method with respect to the transfer function and resolution. Unlike the 3-point method, the mixed method can completely separate the roundness error and the spindle error, and can measure high-frequency components regardless of the probe distance. Resolution can also be improved throughout the entire frequency domain by increasing angular separation of the probes. An optical sensor specifically suited to the mixed method is designed and used to make roundness measurements. A fiber coupler and single-mode fibers are used in the sensor to divide a light beam from a laser diode into two beams, resulting in a compact sensor with good thermal drift characteristics. The displacement meter of the sensor is based on the imaging system principle and has a resolution of 0.1 μm. The angle meter is based on the principle of autocollimation and has a resolution of 0.5 in. A measurement system is constructed to realize measurements of roundness by using the optical sensor. Experimental results confirming the effectiveness of the mixed method for roundness measurements are also presented in this paper.

本文言語English
ページ(範囲)37-45
ページ数9
ジャーナルPrecision Engineering
19
1
DOI
出版ステータスPublished - 1996 1月 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「A new multiprobe method of roundness measurements」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル