A nanoparticle-mist deposition method: fabrication of high-performance ITO flexible thin films under atmospheric conditions

Ryoko Suzuki, Yasutaka Nishi, Masaki Matsubara, Atsushi Muramatsu, Kiyoshi Kanie

研究成果: Article査読

抄録

Indium tin oxide (ITO) thin films with low resistivity and high transparency in the visible light region have been prepared on flexible plastic films by a deposition method using water mist containing ITO nanoparticles (NPs) under atmospheric conditions. The ITO NP-mist was generated by ultrasonic irradiation of a water dispersion. Our developed protrusion-rich ITO NPs were applied as the ITO NPs. The ITO NPs show high dispersion stability in water without the use of any dispersant. Comparison investigations revealed that utilization of the ITO NPs played a critical role in fabricating high-performance ITO thin films on flexible films, and the resistivity reached 9.0 × 10−3 Ω cm. The system could be expected to provide promising advances in the development of a mild and sustainable fabrication procedure for ITO thin films under mild atmospheric conditions without the use of expensive vacuum production systems or harmful and environmentally undesirable chemicals.

本文言語English
論文番号10584
ジャーナルScientific reports
11
1
DOI
出版ステータスPublished - 2021 12

ASJC Scopus subject areas

  • 一般

フィンガープリント

「A nanoparticle-mist deposition method: fabrication of high-performance ITO flexible thin films under atmospheric conditions」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル