A micro-ball tapping probe for form measurement of micro-structured surface

Bin Xu, Yuki Shimizu, So Ito, I Ko

研究成果: Article査読

5 被引用数 (Scopus)

抄録

A micro-ball tapping probe is proposed for the form measurement of the micro-structured surface with high-aspect-ratio features. The micro-ball tapping probe is composed of a micro-ball stylus, a PZT actuator and an adapter. The micro-ball stylus consists of a micro-ball with a diameter of 50 μm, and a glass tube with a cone angle of 10 degrees. The micro-ball tapping probe was employed by a contact type air-bearing displacement sensor. Series of experiments were carried out to confirm the feasibility and performance of the proposed micro-ball tapping probe, including the strength test, the frequency characteristic test, the measurement force test and the surface form measurement for a micro-structured surface. Experimental results revealed that the micro-ball tapping probe is suitable for the form measurement of the micro-structured surface with high-aspect-ratio features.

本文言語English
ページ(範囲)73-80
ページ数8
ジャーナルJournal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
34
1
出版ステータスPublished - 2013 2月 1

ASJC Scopus subject areas

  • 機械工学

フィンガープリント

「A micro-ball tapping probe for form measurement of micro-structured surface」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル