A grain boundary etching method for the analysis of intergranular P-segregation in iron-based alloys

T. Ogura, A. Makino, T. Masumoto

研究成果: Article査読

21 被引用数 (Scopus)

抄録

The effectiveness of a grain boundary etching method for the non-destructive analysis of intergranular segregation of P in iron-based alloys was examined by using a saturated aqueous solution of picric acid containing sodium tridecylbenzene sulfonate. Among all the alloys examined only those doped with P suffered selective etching attack against grain boundaries. The degree of the etching attack in a P-doped NiCr steel was found to have a linear relation with the concentration of grain boundary P as measured by Auger electron spectroscopy. From these evidences, the grain boundary etching method was concluded to be useful as a technique analyzing the grain boundary concentration of P in NiCr steels. The application of the method was successfully made to CrMo and C-free NiCr steels which are hard to exhibit perfect intergranular fracture. The application was not successful to Fe-40 pct Ni and Fe-3 pct Si alloys whose surfaces were unstable electrochemically compared with those of NiCr and CrMo steels.

本文言語English
ページ(範囲)1563-1570
ページ数8
ジャーナルMetallurgical Transactions A
15
8
DOI
出版ステータスPublished - 1984 8 1

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント 「A grain boundary etching method for the analysis of intergranular P-segregation in iron-based alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル