5.4 GHz Lamb wave resonator on LiNbO3 thin crystal plate and its application

Michio Kadota, Takashi Ogami

研究成果: Article査読

56 被引用数 (Scopus)

抄録

A cognitive radio system operating at frequencies from 400 MHz to 6 GHz requires tunable filters with a wide variable frequency range. Wide band resonators are required to realize such tunable filters consisting of resonators. However, it is difficult to fabricate a very high frequency and wide band resonator, such as 6 GHz and wider than 10%, respectively. The first antisymmetric (A1) mode of a Lamb wave on a LiNbO3 thin plate or film having a high velocity and a large electromechanical coupling factor is a suitable wave for fabricating an ultrawide band and high frequency resonator. This time, we attempted to fabricate a higher frequency Lamb wave resonator on a thin LiNbO3 single-crystal plate instead of the LiNbO3 film, though it has been considered difficult to form a very thin LiNbO3 crystal plate. A new one-port Lamb wave resonator showed a high frequency in the 5 GHz range, a wide bandwidth of 12%, and a high impedance ratio of 62 dB at resonant and antiresonant frequencies. Moreover, we applied the resonator to a ladder-type tunable filter, and obtained the tunable range of 9% from 5.58 to 6.06 GHz theoretically.

本文言語English
論文番号07HD11
ジャーナルJapanese journal of applied physics
50
7 PART 2
DOI
出版ステータスPublished - 2011 7月

ASJC Scopus subject areas

  • 工学(全般)
  • 物理学および天文学(全般)

フィンガープリント

「5.4 GHz Lamb wave resonator on LiNbO3 thin crystal plate and its application」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル