In this paper, we report an approach to teach tasks to a high-speed parallel robot, HEXA, which is controlled for the position, force, and compliance all. To employ the force/compliance controlled robots for the industrial applications, it is necessary that there should be some methods to set the desired force and compliance parameters according to the tasks to carry out. Moreover, such a method should facilitate a task teaching approach, reducing the operator's labor, but with very effective results. To fulfill these requirements, we have developed a graphics-based off-line task teaching system that utilizes a 3D graphics simulator and graphics control panels. With this teaching system, we have experimentally implemented two typical tasks of crank turning and surface tracking with the parallel robot HEXA. From the achieved results, we could conclude the effectiveness of the proposed task teaching approach.
|出版ステータス||Published - 2001 1月 1|
|イベント||2001 IEEE International Symposium on Assembly and Task Planning (ISATP2001) - Fukuoka, Japan|
継続期間: 2001 5月 28 → 2001 5月 29
|Other||2001 IEEE International Symposium on Assembly and Task Planning (ISATP2001)|
|Period||01/5/28 → 01/5/29|
ASJC Scopus subject areas