年別の研究成果
年別の研究成果
- 24 件
検索結果
-
2023
Drastic Improvement in Dissimilar Aluminum-to-Steel Joint Strength by Combining Positive Roles of Silicon and Nickel Additions
Suzuki, K. T., Omura, S., Tokita, S., Sato, Y. S. & Tatsumi, Y., 2023 1月, In: Materials and Design. 225, 111444.研究成果: Article › 査読
Open Access -
2022
Effect of Ni Addition on the Interfacial Strength of Al/Cu Dissimilar Welds Produced by Friction Stir Lap Welding
Kurabayashi, K., Tokita, S. & Sato, Y. S., 2022 3月, In: Metals. 12, 3, 453.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
Homogenization of microstructure and mechanical properties of wire arc additive manufactured martensitic stainless steel through optimization of post-process heat treatment
Lyu, Z., Sato, Y. S., Tokita, S., Zhao, Y., Jia, J. & Wu, A., 2022 11月, In: Journal of Materials Research and Technology. 21, p. 2682-2692 11 p.研究成果: Article › 査読
Open Access -
炭素鋼の摩擦攪拌接合性に及ぼす水中施工および表面錆の影響
Sato, Y. S., MiyaMori, T., Tokita, S. & Kokawa, H., 2022 12月, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 108, 12, p. 902-910 9 p.研究成果: Article › 査読
Open Access -
溶接学会若手会員の会 第 65 回運営委員会開催報告
Torigata, K. & Tokita, S., 2022, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 91, 6, p. 87-89 3 p.研究成果: Article › 査読
-
2021
Evolution behavior of liquid film in the heat-affected zone of laser cladding non-weldable nickel-based superalloy
Zhang, Z., Zhao, Y., Shan, J., Wu, A., Sato, Y. S., Tokita, S., Kadoi, K., Inoue, H., Gu, H. & Tang, X., 2021 5月 15, In: Journal of Alloys and Compounds. 863, 158463.研究成果: Article › 査読
12 被引用数 (Scopus) -
Microstructural distribution and anisotropic tensile behavior in a 2Cr13 martensitic stainless steel thin wall fabricated by wire arc additive manufacturing
Lyu, Z., Sato, Y. S., Tokita, S., Zhao, Y., Jia, J. & Wu, A., 2021 12月, In: Materials Today Communications. 29, 102870.研究成果: Article › 査読
Open Access2 被引用数 (Scopus) -
Microstructural evolution in a thin wall of 2Cr13 martensitic stainless steel during wire arc additive manufacturing
Lyu, Z., Sato, Y. S., Tokita, S., Zhao, Y., Jia, J. & Wu, A., 2021 12月, In: Materials Characterization. 182, 111520.研究成果: Article › 査読
Open Access6 被引用数 (Scopus) -
The role of shot peening on liquation cracking in laser cladding of K447A nickel superalloy powders over its non-weldable cast structure
Zhang, Z., Zhao, Y., Shan, J., Wu, A., Sato, Y. S., Tokita, S., Kadoi, K., Inoue, H., Gu, H. & Tang, X., 2021 8月 17, In: Materials Science and Engineering A. 823, 141678.研究成果: Article › 査読
2 被引用数 (Scopus) -
2020
Effect of MC carbide formation on weld solidification cracking susceptibility of austenitic stainless steel
Kadoi, K., Ueda, S., Tokita, S. & Inoue, H., 2020 7月 5, In: Journal of Alloys and Compounds. 828, 154423.研究成果: Article › 査読
13 被引用数 (Scopus) -
Microstructural evolution and solidification cracking susceptibility of grain boundary engineered fully austenitic stainless steel
Tokita, S., Kadoi, K., Kanno, Y. & Inoue, H., 2020 4月 1, In: Welding in the World. 64, 4, p. 593-600 8 p.研究成果: Article › 査読
6 被引用数 (Scopus) -
Rapid joining of commercial-purity Ti to 304 stainless steel using joule heating diffusion bonding: Interfacial microstructure and strength of the dissimilar joint
Suzuki, K. T., Sato, Y. S. & Tokita, S., 2020 12月, In: Metals. 10, 12, p. 1-11 11 p., 1689.研究成果: Article › 査読
Open Access -
Relationship between the microstructure and local corrosion properties of weld metal in austenitic stainless steels
Tokita, S., Kadoi, K., Aoki, S. & Inoue, H., 2020 10月, In: Corrosion Science. 175, 108867.研究成果: Article › 査読
15 被引用数 (Scopus) -
Report of the 1st WELNET online group seminar
TOKITA, S., 2020, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 89, 7, p. 509-510 2 p.研究成果: Article › 査読
-
Suppression of intergranular corrosion by surface grain boundary engineering of 304 austenitic stainless steel using laser peening plus annealing
Tokita, S., Kokawa, H., Kodama, S., Sato, Y. S., Sano, Y., Li, Z., Feng, K. & Wu, Y., 2020 12月, In: Materials Today Communications. 25, 101572.研究成果: Article › 査読
14 被引用数 (Scopus) -
溶接学会若手会員の会 第 62 回運営委員会開催報告
Torigata, K. & Tokita, S., 2020, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 89, 6, p. 454-455 2 p.研究成果: Article › 査読
-
溶接学会若手会員の会 第 64 回運営委員会開催報告
Tokita, S. & Torigata, K., 2020, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 90, 5, p. 405-407 3 p.研究成果: Article › 査読
-
2019
Effects of carbon and chromium on microstructure evolution and mechanical properties of friction stir weldment in medium-carbon steel
Cheng, C., Kadoi, K., Tokita, S., Fujii, H., Ushioda, K. & Inoue, H., 2019 8月 5, In: Materials Science and Engineering A. 762, 138060.研究成果: Article › 査読
14 被引用数 (Scopus) -
Relationship between alloy element and weld solidification cracking susceptibility of austenitic stainless steel
Ueda, S., Kadoi, K., Tokita, S. & Inoue, H., 2019, In: Isij International. 59, 7, p. 1323-1329 7 p.研究成果: Article › 査読
Open Access4 被引用数 (Scopus) -
The 4th IIW Young Professionals International Conference 2018 （YPIC2018）参加報告*
Tokita, S., 2019, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 88, 4, p. 279-282 4 p.研究成果: Article › 査読
-
2017
In situ EBSD observation of grain boundary character distribution evolution during thermomechanical process used for grain boundary engineering of 304 austenitic stainless steel
Tokita, S., Kokawa, H., Sato, Y. S. & Fujii, H., 2017 9月, In: Materials Characterization. 131, p. 31-38 8 p.研究成果: Article › 査読
61 被引用数 (Scopus) -
2016
Prevention of weld decay of austenitic stainless steels by grain boundary engineering
Tokita, S., Kokawa, H., Sato, S. Y. & Fujii, T. H., 2016, In: Yosetsu Gakkai Shi/Journal of the Japan Welding Society. 85, 6, p. 588-592 5 p.研究成果: Article › 査読
-
2015
Effect of post-GBE strain on weld decay resistance of grain boundary engineered 304 austenitic stainless steel
Tokita, S., Ikeshoji, M., Yamada, G., Kurihara, K., Kokawa, H., Sato, Y. S. & Fujii, H. T., 2015 11月 1, In: Science and Technology of Welding and Joining. 20, 8, p. 702-707 6 p.研究成果: Article › 査読
7 被引用数 (Scopus) -
2013
Effect of post-GBE strain-sensitisation on corrosion resistance of grain boundary engineered 304 austenitic stainless steel
Yamada, G., Kokawa, H., Yasuda, Y., Tokita, S., Yokoyama, T., Sato, Y. S., Fujii, H. T. & Tsurekawa, S., 2013 4月 1, In: Philosophical Magazine. 93, 10-12, p. 1443-1453 11 p.研究成果: Article › 査読
14 被引用数 (Scopus)