Wear map of ceramics. (2nd Report, Construction of mild-severe wear mode map)

Koshi Adachi, Koji Kato, Ning Chen

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

The overall objective of this study is to introduce a wear map of ceramics which shows the regions of dominant wear modes obtained in a wide range of materials and operating conditions. In the 1st report, it was clarified that the sliding wear mode of ceramics observed under various contact pressures, sliding velocities and temperatures can be classified into two types called `mild wear' and `severe wear' based on the ratio of worn surface roughness, Ry to mean grain size, Dg, and specific wear amount, ws. In this paper, the critical condition of the mild and severe wear is analyzed using an intergranular fracture model from both the view points of mechanical and thermal aspects, and a wear map of ceramics, which can define the regimes of mild and severe wear, is introduced; it uses two dimensionless parameters named as the mechanical severity of contact Sc,m and the thermal severity of contact Sc,t, as the vertical and horizontal axes, respectively. The availability of the wear map constructed in this way can be proved by the experimental results observed over a wide range of materials and operating conditions.

Original languageEnglish
Pages (from-to)2448-2455
Number of pages8
JournalNippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C
Volume63
Issue number611
DOIs
Publication statusPublished - 1997

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Wear map of ceramics. (2nd Report, Construction of mild-severe wear mode map)'. Together they form a unique fingerprint.

Cite this