Wear loss and elution of C.P.Ti and titanium alloys in simulated body fluids

K. Ueda, T. Narushima, C. Ouchi, Y. Iguchi

Research output: Contribution to journalConference articlepeer-review

2 Citations (Scopus)

Abstract

Wear behavior of titanium materials such as C.P.Ti, Ti-6Al-4V and Ti-6Al-7Nb, was studied in simulated body fluids by means of the pin-on-disk type wear testing. The mass loss in wear testing increased with increasing the sliding distance. The α+β type titanium alloys, Ti-6Al-4V and Ti-6Al-7Nb, exhibited higher wear resistance than the C.P.Ti. Average size of the wear debris was 4.5 jam and 3.7 urn for C.P.Ti and the α+β type titanium alloys, respectively. The elution of metallic constituents into 1 mass% lactic acid solution was detected after the wear test.

Original languageEnglish
Pages (from-to)2333-2336
Number of pages4
JournalMaterials Science Forum
Volume475-479
Issue numberIII
DOIs
Publication statusPublished - 2005 Jan 1
EventPRICM 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing - Beijing, China
Duration: 2004 Nov 22004 Nov 5

Keywords

  • Elution
  • Pin-on-disk
  • Titanium
  • Wear debris
  • Wear loss

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Wear loss and elution of C.P.Ti and titanium alloys in simulated body fluids'. Together they form a unique fingerprint.

Cite this