Use of cellulose nanofibers as a denture immersing solution

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

The purpose of this study was to investigate the influence of cellulose nanofibers (CNF) solution on the mechanical and biological properties of denture base resins (DBR). Two types of CNFs obtained from bamboo (BB) and needle-leaved (NB) trees were used in this study. We prepared 18 different CNF solutions based on their fibrillation (A-low, B-middle, and C-high) and concentration (0.05, 0.10, and 0.20 wt%). A heat-polymerized acrylic resin was used as DBR. The contact angles for each specimen were measured after immersion. The flexural properties of the immersed specimens, and the biological properties of the CNF solutions were examined. Specimens immersed in CNF-NB-C-0.05 wt% solution presented with the lowest contact angles. Specimens in CNF-NB-C and CNF-BB-A groups showed higher flexural modulus values. No cytotoxic or antimicrobial effects were observed for the CNF solutions. This study suggest that CNF solution may improve the surface wettability of the DBR without affecting its flexural property.

Original languageEnglish
Pages (from-to)80-88
Number of pages9
JournalDental materials journal
Volume39
Issue number1
DOIs
Publication statusPublished - 2020

Keywords

  • Biological property
  • Cellulose nanofiber
  • Denture base resin
  • Flexural property
  • Surface wettability

ASJC Scopus subject areas

  • Ceramics and Composites
  • Dentistry(all)

Fingerprint Dive into the research topics of 'Use of cellulose nanofibers as a denture immersing solution'. Together they form a unique fingerprint.

Cite this