Ultrasonic-assisted face milling for fabricating hierarchical microstructures

Research output: Contribution to journalArticlepeer-review

Abstract

Surface microstructures can provide various function-alities, and wettability is a typical surface property that can be controlled by the surface textures. This study attempted to fabricate hierarchical microstructures through ultrasonic-assisted face milling (UAFM) to change the surface functionality by specifically focusing on the wettability. The fabrication involved the use of an ultrasonic generating spindle and a self-designed diamond tool. The locus of the tip of the diamond tool was computed based on the equation of motion, and the micro-and macrostructures are illustrated in this paper. The structures were confirmed through observations using a white-light interferome-ter. The wettability on six zones of the processed area was measured, and the results indicated that the central zone of the UAFM surface became hydrophobic, whereas the edge zone became hydrophilic.

Original languageEnglish
Pages (from-to)238-244
Number of pages7
JournalInternational Journal of Automation Technology
Volume14
Issue number2
DOIs
Publication statusPublished - 2020

Keywords

  • Functional surfaces
  • Surface finishing
  • Ultrasonic cutting
  • Wetting

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Fingerprint Dive into the research topics of 'Ultrasonic-assisted face milling for fabricating hierarchical microstructures'. Together they form a unique fingerprint.

Cite this