The Suitable Region of High-Speed Submerged Water-Jets for Cutting and Peening

Yoshiaki Yamauchi, Hitoshi Soyama, Yasunori Adachi, Kazunori Sato, Takenori Shindo, Risaburo Oba, Ryoichiro Oshima, Masahiro Yamabe

Research output: Contribution to journalArticlepeer-review

9 Citations (Scopus)

Abstract

In order to establish techniques of cutting, drilling, peening and flushing by high-speed submerged water-jets, we systematically observe the eroded surface on aluminum-alloy test-pieces in relation to the aspects of cavitating jets, especially for the impinging jet through lucite-test-pieces, for several types of nozzles. The impulsive pressures induced by the impinging jets are also measured by means of pressure-sensitive film. It is concluded that the erosion characteristics are quite different in two regions differentiated by the standoff distance. Cylindrical, small and deep pits occur in one of the regions, while small lots of plastic deformations occur in the other region. The former is suitable for cutting, while the latter is for peening.

Original languageEnglish
Pages (from-to)16-22
Number of pages7
JournalTransactions of the Japan Society of Mechanical Engineers Series B
Volume59
Issue number557
DOIs
Publication statusPublished - 1993

Keywords

  • Cavitation
  • Erosion
  • Impulsive Pressure
  • Jet
  • Nozzle
  • Peening

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'The Suitable Region of High-Speed Submerged Water-Jets for Cutting and Peening'. Together they form a unique fingerprint.

Cite this