The influence of cooling rate on the hardness of Pd-Si binary glassy alloys

Na Chen, Ke Fu Yao, Fang Ruan, Yi Qiang Yang

    Research output: Contribution to journalArticlepeer-review

    18 Citations (Scopus)

    Abstract

    The influence of cooling rate on the hardness of the as-prepared Pd81Si19 binary glassy alloys has been studied. It has been found that decreasing the employed cooling rate would increase the hardness and decrease the full width at half maximum (FWHM) of their X-ray diffractometry (XRD) spectrum. The microhardness of the bulk glassy alloy prepared by air cooling is about 453.9 kg/mm2, 41% higher than that of the rapid solidified glassy ribbons. Through careful investigation of the FWHM of the XRD spectrum and the high resolution transmission electron microscope images, the cooling rate dependence of hardness is suggested to be attributed to the difference in structural uniformity and the resulted local ordering atomic clusters (medium-range order (MRO) regions) within the as-prepared glassy samples. Moreover, it has been found that decreasing cooling rate would promote the formation of denser atomic configuration and the local ordering clusters (MRO).

    Original languageEnglish
    Pages (from-to)274-278
    Number of pages5
    JournalMaterials Science and Engineering A
    Volume473
    Issue number1-2
    DOIs
    Publication statusPublished - 2008 Jan 25

    Keywords

    • Cooling rate
    • Hardness
    • Metallic glass
    • Microstructure

    ASJC Scopus subject areas

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    Fingerprint Dive into the research topics of 'The influence of cooling rate on the hardness of Pd-Si binary glassy alloys'. Together they form a unique fingerprint.

    Cite this