The corrosion behavior of amorphous and crystalline Ni-10Ta-20P alloys in 12M HCl

H. J. Lee, Eiji Akiyama, H. Habazaki, A. Kawashima, K. Asami, K. Hashimoto

Research output: Contribution to journalArticle

26 Citations (Scopus)

Abstract

The addition of a large amount of phosphorus, such as 20 at%, to arc-melted crystalline and rapidly quenched amorphous Ni-10Ta alloys greatly enhances the corrosion resistance in 12 M HCl at 30°C. The corrosion rate of the rapidly quenched amorphous Ni-10Ta-20P alloy after immersion for 168 h is about one order of magnitude lower than that of the arc-melted crystalline counterpart. The open circuit potentials of both alloys are initially ennobled by accumulation of elemental phosphorus having a high activity for the cathodic oxygen reduction. The open circuit potential is further ennobled by spontaneous passivation. The ennoblement of the open circuit potential of the amorphous alloy is faster than that of the crystalline counterpart, because of faster passivation as a result of the formation of a tantalum-enriched passive film.

Original languageEnglish
Pages (from-to)1269-1279
Number of pages11
JournalCorrosion Science
Volume38
Issue number8
DOIs
Publication statusPublished - 1996 Jan 1

Keywords

  • A. alloy
  • B. EPMA
  • B. SEM
  • B. XPS
  • C. passive films

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)
  • Materials Science(all)

Fingerprint Dive into the research topics of 'The corrosion behavior of amorphous and crystalline Ni-10Ta-20P alloys in 12M HCl'. Together they form a unique fingerprint.

  • Cite this