TY - JOUR
T1 - The Belle II silicon vertex detector
T2 - Assembly and initial results
AU - (Belle-II SVD Collaboration)
AU - Thalmeier, R.
AU - Casarosa, G.
AU - Schwanda, C.
AU - Aihara, H.
AU - Aziz, T.
AU - Bacher, S.
AU - Bahinipati, S.
AU - Barberio, E.
AU - Baroncelli, Ti
AU - Baroncelli, To
AU - Basith, A. K.
AU - Batignani, G.
AU - Bauer, A.
AU - Behera, P. K.
AU - Bertacchi, V.
AU - Bettarini, S.
AU - Bhuyan, B.
AU - Bilka, T.
AU - Bosi, F.
AU - Bosisio, L.
AU - Bozek, A.
AU - Buchsteiner, F.
AU - Caria, G.
AU - Ceccanti, M.
AU - Červenkov, D.
AU - Czank, T.
AU - Dash, N.
AU - De Nuccio, M.
AU - Doležal, Z.
AU - Forti, F.
AU - Friedl, M.
AU - Gobbo, B.
AU - Grimaldo, J. A.M.
AU - Hara, K.
AU - Higuchi, T.
AU - Irmler, C.
AU - Ishikawa, A.
AU - Jeon, H. B.
AU - Joo, C.
AU - Kaleta, M.
AU - Kandra, J.
AU - Kambara, N.
AU - Kang, K. H.
AU - Kodyš, P.
AU - Kohriki, T.
AU - Koike, S.
AU - Komarov, I.
AU - Kumar, M.
AU - Kumar, R.
AU - Kun, W.
N1 - Funding Information:
This work is supported by MEXT , WPI , and JSPS (Japan) ; ARC (Australia) ; BMWFW (Austria) ; MSMT (Czechia) ; AIDA-2020 (Germany) ; DAE and DST (India) ; INFN (Italy) ; NRF - 2016K1A3A7A09005605 and RSRI (Korea) ; and MNiSW (Poland) .
Funding Information:
This work is supported by MEXT, WPI, and JSPS (Japan); ARC (Australia); BMWFW (Austria); MSMT (Czechia); AIDA-2020 (Germany); DAE and DST (India); INFN (Italy); NRF-2016K1A3A7A09005605 and RSRI (Korea); and MNiSW (Poland).
Publisher Copyright:
© 2018 Elsevier B.V.
PY - 2019/8/21
Y1 - 2019/8/21
N2 - The “chip-on-sensor” concept of this detector minimizes the distance of the signal propagation from the double-sided silicon detector strips to the readout chips and thus reduces noise from strip capacitance. One half of the detector is built, the second half is being assembled at the time of writing. Prototypes have been tested in several test beams as well as in the so-called Phase 2 setup inside the detector structure. First results from a commissioning run of the Belle-II prototype SVD detector are presented. The measured signal-to-noise and timing performance are found to be according to design specifications.
AB - The “chip-on-sensor” concept of this detector minimizes the distance of the signal propagation from the double-sided silicon detector strips to the readout chips and thus reduces noise from strip capacitance. One half of the detector is built, the second half is being assembled at the time of writing. Prototypes have been tested in several test beams as well as in the so-called Phase 2 setup inside the detector structure. First results from a commissioning run of the Belle-II prototype SVD detector are presented. The measured signal-to-noise and timing performance are found to be according to design specifications.
KW - Assembly
KW - First results
KW - Silicon vertex detector
UR - http://www.scopus.com/inward/record.url?scp=85053019561&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85053019561&partnerID=8YFLogxK
U2 - 10.1016/j.nima.2018.08.066
DO - 10.1016/j.nima.2018.08.066
M3 - Review article
AN - SCOPUS:85053019561
VL - 936
SP - 712
EP - 714
JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
SN - 0168-9002
ER -