TENSILE PROPERTIES OF MOLYBDENUM COATED WITH TITANIUM CARBIDE AND/OR TITANIUM NITRIDE BY CHEMICAL VAPOUR DEPOSITION.

Tatsuo Shikama; Masakazu Fujitsuka; Masao Fukutomi; Masatoshi Okada; Yoshio Gomay; Kunio Shibuki

TENSILE PROPERTIES OF MOLYBDENUM COATED WITH TITANIUM CARBIDE AND/OR TITANIUM NITRIDE BY CHEMICAL VAPOUR DEPOSITION.

Tatsuo Shikama, Masakazu Fujitsuka, Masao Fukutomi, Masatoshi Okada, Yoshio Gomay, Kunio Shibuki

Institute for Materials Research (IMR)

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

Fully annealed molybdenum was tensile tested at 300 and 1070 K. The coated molybdenum has a higher yield strength with smaller rupture elongation and reduction in area. The coating changed the rupture mode from intergranular to transgranular. A sharp yield drop and small stress drops during deformation were observed on molybdenum coated with titanium carbide at 300 K. Stress drops were accompanied by acoustic emission.

Original language	English
Pages (from-to)	1053-1060
Number of pages	8
Journal	Nippon Kinzoku Gakkai-si
Volume	48
Issue number	11
Publication status	Published - 1984 Nov 1

ASJC Scopus subject areas

Condensed Matter Physics
Mechanics of Materials
Metals and Alloys
Materials Chemistry

Cite this

@article{7f38756cfe7d45229dcbaa9390a82558,

title = "TENSILE PROPERTIES OF MOLYBDENUM COATED WITH TITANIUM CARBIDE AND/OR TITANIUM NITRIDE BY CHEMICAL VAPOUR DEPOSITION.",

abstract = "Fully annealed molybdenum was tensile tested at 300 and 1070 K. The coated molybdenum has a higher yield strength with smaller rupture elongation and reduction in area. The coating changed the rupture mode from intergranular to transgranular. A sharp yield drop and small stress drops during deformation were observed on molybdenum coated with titanium carbide at 300 K. Stress drops were accompanied by acoustic emission.",

author = "Tatsuo Shikama and Masakazu Fujitsuka and Masao Fukutomi and Masatoshi Okada and Yoshio Gomay and Kunio Shibuki",

year = "1984",

month = nov,

day = "1",

language = "English",

volume = "48",

pages = "1053--1060",

journal = "Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals",

issn = "0021-4876",

publisher = "Japan Institute of Metals (JIM)",

number = "11",

}

TY - JOUR

T1 - TENSILE PROPERTIES OF MOLYBDENUM COATED WITH TITANIUM CARBIDE AND/OR TITANIUM NITRIDE BY CHEMICAL VAPOUR DEPOSITION.

AU - Shikama, Tatsuo

AU - Fujitsuka, Masakazu

AU - Fukutomi, Masao

AU - Okada, Masatoshi

AU - Gomay, Yoshio

AU - Shibuki, Kunio

PY - 1984/11/1

Y1 - 1984/11/1

N2 - Fully annealed molybdenum was tensile tested at 300 and 1070 K. The coated molybdenum has a higher yield strength with smaller rupture elongation and reduction in area. The coating changed the rupture mode from intergranular to transgranular. A sharp yield drop and small stress drops during deformation were observed on molybdenum coated with titanium carbide at 300 K. Stress drops were accompanied by acoustic emission.

AB - Fully annealed molybdenum was tensile tested at 300 and 1070 K. The coated molybdenum has a higher yield strength with smaller rupture elongation and reduction in area. The coating changed the rupture mode from intergranular to transgranular. A sharp yield drop and small stress drops during deformation were observed on molybdenum coated with titanium carbide at 300 K. Stress drops were accompanied by acoustic emission.

UR - http://www.scopus.com/inward/record.url?scp=0021519602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0021519602&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0021519602

VL - 48

SP - 1053

EP - 1060

JO - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

JF - Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals

SN - 0021-4876

IS - 11

ER -

TENSILE PROPERTIES OF MOLYBDENUM COATED WITH TITANIUM CARBIDE AND/OR TITANIUM NITRIDE BY CHEMICAL VAPOUR DEPOSITION.

Abstract

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this