Technology for productivity improvement of sintering based on designing of composite granulation and bed structure of sinter mixture

Chikashi Kamijo, Masaki Hara, Yasuhide Yamaguchi, Masahide Yoshikawa, Junya Kano, Masaru Matsumura, Takazou Kawaguchi

Research output: Contribution to journalArticlepeer-review

8 Citations (Scopus)

Abstract

Recently, an increase in the amount of fine ore, such as Marra Mamba or Brazilian concentrated ultra fine, in raw material of sinter ore lowers the permeability of sintering bed and the yield of the sinter ore. The collapse of voids in the sintering bed will cause these problems although the bed has a porous structure. Therefore, controlling the bed structure by including loosely packed regions and densely packed regions in the same packed bed has been discussed. This new idea is named MEBIOS (Mosaic Embedding Iron Ore Sintering). In this report, permeability improvement techniques based on MEBIOS concept were studied. In order to granulate large dense green balls with ordinary sinter feed ore, mathematical simulation and granulation tests by using pan pelletizers were carried out. The influence of rim height and pan diameter on movement of raw material in pan was investigated. Also, influence of rim height and slope angle on hold-up and influence of residence time on diameter of green balls were studied. Finally, this technique was installed in Wakayama No. 5 sinter plant. As a result, yearly average productivity of 1.41 t/ m2 / h and the use of 135 kg/t-sinter Brazilian concentrated ultra fine ore were achieved with 1 350 MJ/t-sinter heat consumption for sintering in 2011.

Original languageEnglish
Pages (from-to)1497-1502
Number of pages6
JournalIsij International
Volume53
Issue number9
DOIs
Publication statusPublished - 2013 Jan 1

Keywords

  • Concentrate
  • Fine
  • Green ball
  • MEBIOS
  • Pan pelletizer
  • Separate granulation
  • Sinter

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Technology for productivity improvement of sintering based on designing of composite granulation and bed structure of sinter mixture'. Together they form a unique fingerprint.

Cite this