Synthesis of Fe based metallic glass-Pd based metallic glass composite by slightly pressured liquid phase sintering

Noriharu Yodoshi, Naohito Morita, Rui Yamada, Akira Kawasaki, Ryuzo Watanabe

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

To consolidate [(Fe 0.5Co 0.5) 0.75Si 0.05B 0.5] 96Nd 4 metallic glass powder to full density, a pressurized liquid phase sintering was employed, which was intended to promote densification by an enhanced wetting of a liquid phase with solid particles. Pd 42.5Ni 7.5 P 20Cu 30 metallic glass powder, which has been reported to have a high glass forming ability and the lowest critical cooling rate of glass formation of 0.067 K/s, was chosen a liquid phase component. The melting point of the Pd 42.5Ni 7.5P 20Cu 30 metallic glass alloy of 763 K is lower than the glass transition temperature of the [(Fe 0.5Co 0.5) 0.75Si 0.05B o.2] 96Nb 4 metallic glass alloy of 808 K. However, the wettability of this alloy with the Pd 42.5Ni 7.5P 20Cu 30 alloy was revealed to be poor. Therefore, sintering pressure was applied to the compacts to promote a viscous flow deformation of solid particles and also to enhance the intergranular permeation of the liquid phase. A specially designed micro-hot press was devised for the pressure-sintering experiment. A pseudo wettability was observed during pressure-sintering, and the liquid phase was found to fill completely the intergranular space of the powder compact. The relative density of 64-95%, as well as the sintering structure, could be controlled by the punch displacement to squeeze out a part of the liquid phase from the compact. The compressive fracture strength of the obtained metallic glass composite was found to be as high as 2051 MPa, and the fracture was observed to be intragranular type, suggesting a good bonding in the particle-binding phase interface.

Original languageEnglish
Pages (from-to)643-650
Number of pages8
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume73
Issue number8
DOIs
Publication statusPublished - 2009 Aug

Keywords

  • Full densification
  • Liquid phase sintering
  • Metallic glass powders
  • Pressure consolidation

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Synthesis of Fe based metallic glass-Pd based metallic glass composite by slightly pressured liquid phase sintering'. Together they form a unique fingerprint.

Cite this