Surface modification of porous silica using supercritical carbon dioxide

Ikuo Ushiki, Masaki Ota, Yoshiyuki Sato, Hiroshi Inomata

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

Surface modification of porous silica in supercritical carbon dioxide was studied using various alcohols as hydrophobizing reagents. The reaction was carried out using methanol, ethanol and 2-propanol at temperatures from 40 to 100°C, pressures from 8 to 20MPa and reaction time from 0.5 to 6 h. The experimental results indicated that the surface modification occurred under all conditions, and methanol could provide the highest alkyl group density after modification among the three alcohols. Pressure and concentration dependence showed that the maximum density of alkyl group was obtained near the phase boundary condition for the carbon dioxide and methanol system. It was also suggested that hydrophobicity of the surface after modification was determined by density and size effects of alkyl group, which implied the existence of a threshold value of inversion from hydrophilicity to hydrophobicity.

Original languageEnglish
Pages (from-to)391-396
Number of pages6
Journalkagaku kogaku ronbunshu
Volume38
Issue number6
DOIs
Publication statusPublished - 2012 Nov 30

Keywords

  • Alcohol
  • Porous silica
  • Supercritical carbon dioxide
  • Surface modification

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Chemistry(all)

Fingerprint Dive into the research topics of 'Surface modification of porous silica using supercritical carbon dioxide'. Together they form a unique fingerprint.

Cite this