Surface form measurement of a small roll workpiece

Toshiki Saito; Yuki Machida; Yuki Shimizu; Yuanliu Chen; Wei Gao

Surface form measurement of a small roll workpiece

Toshiki Saito, Yuki Machida, Yuki Shimizu, Yuanliu Chen, Wei Gao

ENG - Finemechanics

Research output: Contribution to conference › Paper › peer-review

Abstract

This paper proposes a new surface form measurement method using a scanning type surface profiler for small roll worlpieces, which are used in many industrial fields. In this method, inclination of a workpiece is required to be aligned precisely. For this reason, this paper also proposes a method of measuring the inclination angle of the workpiece without using any other external sensors but using a scanning probe of the surface profiler. In order to confirm the effectiveness of the proposed principles, a measurement system is developed and some experiments are carried out.

Original language	English
Publication status	Published - 2017 Nov 13
Event	9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 - Hiroshima City, Japan Duration: 2017 Nov 13 → 2017 Nov 17

Other

Other	9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017
Country/Territory	Japan
City	Hiroshima City
Period	17/11/13 → 17/11/17

Keywords

Cylindrical workpiece
Inclination
Measurement
Scanning-type surface profiler
Surface form

ASJC Scopus subject areas

Industrial and Manufacturing Engineering

Cite this

@conference{b83397906ca94ec285b6b98c6d75ca76,

title = "Surface form measurement of a small roll workpiece",

abstract = "This paper proposes a new surface form measurement method using a scanning type surface profiler for small roll worlpieces, which are used in many industrial fields. In this method, inclination of a workpiece is required to be aligned precisely. For this reason, this paper also proposes a method of measuring the inclination angle of the workpiece without using any other external sensors but using a scanning probe of the surface profiler. In order to confirm the effectiveness of the proposed principles, a measurement system is developed and some experiments are carried out.",

keywords = "Cylindrical workpiece, Inclination, Measurement, Scanning-type surface profiler, Surface form",

author = "Toshiki Saito and Yuki Machida and Yuki Shimizu and Yuanliu Chen and Wei Gao",

note = "Funding Information: This work was supported by the Japan Society for the Promotion of Science (JSPS).; 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 ; Conference date: 13-11-2017 Through 17-11-2017",

year = "2017",

month = nov,

day = "13",

language = "English",

}

TY - CONF

T1 - Surface form measurement of a small roll workpiece

AU - Saito, Toshiki

AU - Machida, Yuki

AU - Shimizu, Yuki

AU - Chen, Yuanliu

AU - Gao, Wei

N1 - Funding Information: This work was supported by the Japan Society for the Promotion of Science (JSPS).

PY - 2017/11/13

Y1 - 2017/11/13

N2 - This paper proposes a new surface form measurement method using a scanning type surface profiler for small roll worlpieces, which are used in many industrial fields. In this method, inclination of a workpiece is required to be aligned precisely. For this reason, this paper also proposes a method of measuring the inclination angle of the workpiece without using any other external sensors but using a scanning probe of the surface profiler. In order to confirm the effectiveness of the proposed principles, a measurement system is developed and some experiments are carried out.

AB - This paper proposes a new surface form measurement method using a scanning type surface profiler for small roll worlpieces, which are used in many industrial fields. In this method, inclination of a workpiece is required to be aligned precisely. For this reason, this paper also proposes a method of measuring the inclination angle of the workpiece without using any other external sensors but using a scanning probe of the surface profiler. In order to confirm the effectiveness of the proposed principles, a measurement system is developed and some experiments are carried out.

KW - Cylindrical workpiece

KW - Inclination

KW - Measurement

KW - Scanning-type surface profiler

KW - Surface form

UR - http://www.scopus.com/inward/record.url?scp=85041352939&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041352939&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:85041352939

T2 - 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017

Y2 - 13 November 2017 through 17 November 2017

ER -

Surface form measurement of a small roll workpiece

Abstract

Other

Keywords

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this