Superplasticity of Cu-Al-Mn-Ni shape memory alloy

Toshihiro Omori, Naoki Koeda, Yuji Suto, Ryosuke Kainuma, Kiyohito Ishida

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

The microstructurc and superplastic behavior at 450°C and 500°C in Cu-Al-Mn-based shape memory alloys were investigated using optical microscopy and a tensile test. It was found that a fine α (fcc) + β (bcc) two-phase structure with a grain size of 3 μm in diameter can be obtained in Cu-Al-Mn-Ni alloy by annealing at 600°C. The flow stress of Cu-Al-Mn-Ni alloy depends on the strain rate and the strain rate sensitivity is over 0.3 with an elongation of over several hundred percent, which shows that the Cu-Al-Mn-Ni shape memory alloy exhibits superplasticity. For the test temperature at 500°C and a strain rate of 5 × 10-4 s -1, a maximal elongation of 1150% was obtained. The formation of cavity stringers lying parallel to the tensile axis was observed and the size of the cavity was larger as the specimen was more highly deformed.

Original languageEnglish
Pages (from-to)2914-2918
Number of pages5
JournalMaterials Transactions
Volume48
Issue number11
DOIs
Publication statusPublished - 2007 Nov 1

Keywords

  • Cavity
  • Copper-aluminum-manganese
  • Shape memory alloy
  • Superelaslicity
  • Superplasticity

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Superplasticity of Cu-Al-Mn-Ni shape memory alloy'. Together they form a unique fingerprint.

  • Cite this