Studies on Centerless Grinding(lst Report) -Grinding Force Measurement-

Yongbo Wu, Katsuo Syoji, Tsunemoto Kuriyagawa

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

This paper describes new equations for calculating grinding forces and the new measuring system in centerless infeed grinding. In the equations, there are some unknown parameters which must be measured experimentally. For getting the values, such as forces on blade and stopper, angular velocity and acceleration of workpiece a 3-component dynamometer and non-contact workpiece velocity sensor were mounted on the grinding machine. From this measuring system, normal and tangential grinding forces at grinding point were measured in centerless grinding of a ferrite work piece with a diamond wheel. These values agreed well with the grinding forces from a conventional measurement in cylindrical grinding, and it was found that the measuring system for centerless grinding has satisfied performance.

Original languageEnglish
Pages (from-to)411-414
Number of pages4
JournalJournal of the Japan Society for Precision Engineering
Volume61
Issue number3
DOIs
Publication statusPublished - 1995

Keywords

  • 3-component dynamometer
  • centerless grinding
  • diamond wheel
  • dressing
  • grinding force
  • truing

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Studies on Centerless Grinding(lst Report) -Grinding Force Measurement-'. Together they form a unique fingerprint.

Cite this