Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase

A. Yu. Churyumov; A. I. Bazlov; A. N. Solonin; V. Yu. Zadorozhnyi; G. Q. Xie; S. Li; D. V. Louzguine-Luzgin

doi:10.1134/S0031918X13090044

Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase

A. Yu. Churyumov, A. I. Bazlov, A. N. Solonin, V. Yu. Zadorozhnyi, G. Q. Xie, S. Li, D. V. Louzguine-Luzgin

Advanced Institute for Materials Research (AIMR)

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Abstract

The structure of specimens of Ni-Cu-Ti-Zr alloys with an amorphous phase has been examined by X-ray diffraction, as well as by transmission and scanning electron microscopy. Mechanical characteristics of the alloys have been determined using universal testing machines. Transformation-induced plasticity has been found to exist. The specimens demonstrate a good combination of strength and plasticity owing to both the composite effect of a heterophase structure and the dynamic martensitic transformation that develops during deformation.

Original language	English
Pages (from-to)	773-778
Number of pages	6
Journal	Physics of Metals and Metallography
Volume	114
Issue number	9
DOIs	https://doi.org/10.1134/S0031918X13090044
Publication status	Published - 2013 Sept

Keywords

Amorphous phase
Bulk metallic glasses
Composite materials
Mechanical properties
Structure

ASJC Scopus subject areas

Condensed Matter Physics
Materials Chemistry

Access to Document

10.1134/S0031918X13090044

Cite this

@article{7bfa73a55b37445390cc8423f9687b97,

title = "Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase",

abstract = "The structure of specimens of Ni-Cu-Ti-Zr alloys with an amorphous phase has been examined by X-ray diffraction, as well as by transmission and scanning electron microscopy. Mechanical characteristics of the alloys have been determined using universal testing machines. Transformation-induced plasticity has been found to exist. The specimens demonstrate a good combination of strength and plasticity owing to both the composite effect of a heterophase structure and the dynamic martensitic transformation that develops during deformation.",

keywords = "Amorphous phase, Bulk metallic glasses, Composite materials, Mechanical properties, Structure",

author = "{Yu. Churyumov}, A. and Bazlov, {A. I.} and Solonin, {A. N.} and {Yu. Zadorozhnyi}, V. and Xie, {G. Q.} and S. Li and Louzguine-Luzgin, {D. V.}",

note = "Funding Information: ACKNOWLEDGMENTS The work was supported in part by the Ministry of Education and Science of the Russian Federation; Development Program of MISiS National University of Science and Technology; the Russian Foundation for Basic Research, project no. 13 03 91330 NNIO_a; and WPI AIMR, Japan.",

year = "2013",

month = sep,

doi = "10.1134/S0031918X13090044",

language = "English",

volume = "114",

pages = "773--778",

journal = "Physics of Metals and Metallography",

issn = "0031-918X",

publisher = "Maik Nauka-Interperiodica Publishing",

number = "9",

}

TY - JOUR

T1 - Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase

AU - Yu. Churyumov, A.

AU - Bazlov, A. I.

AU - Solonin, A. N.

AU - Yu. Zadorozhnyi, V.

AU - Xie, G. Q.

AU - Li, S.

AU - Louzguine-Luzgin, D. V.

N1 - Funding Information: ACKNOWLEDGMENTS The work was supported in part by the Ministry of Education and Science of the Russian Federation; Development Program of MISiS National University of Science and Technology; the Russian Foundation for Basic Research, project no. 13 03 91330 NNIO_a; and WPI AIMR, Japan.

PY - 2013/9

Y1 - 2013/9

N2 - The structure of specimens of Ni-Cu-Ti-Zr alloys with an amorphous phase has been examined by X-ray diffraction, as well as by transmission and scanning electron microscopy. Mechanical characteristics of the alloys have been determined using universal testing machines. Transformation-induced plasticity has been found to exist. The specimens demonstrate a good combination of strength and plasticity owing to both the composite effect of a heterophase structure and the dynamic martensitic transformation that develops during deformation.

AB - The structure of specimens of Ni-Cu-Ti-Zr alloys with an amorphous phase has been examined by X-ray diffraction, as well as by transmission and scanning electron microscopy. Mechanical characteristics of the alloys have been determined using universal testing machines. Transformation-induced plasticity has been found to exist. The specimens demonstrate a good combination of strength and plasticity owing to both the composite effect of a heterophase structure and the dynamic martensitic transformation that develops during deformation.

KW - Amorphous phase

KW - Bulk metallic glasses

KW - Composite materials

KW - Mechanical properties

KW - Structure

UR - http://www.scopus.com/inward/record.url?scp=84893102987&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84893102987&partnerID=8YFLogxK

U2 - 10.1134/S0031918X13090044

DO - 10.1134/S0031918X13090044

M3 - Article

AN - SCOPUS:84893102987

SN - 0031-918X

VL - 114

SP - 773

EP - 778

JO - Physics of Metals and Metallography

JF - Physics of Metals and Metallography

IS - 9

ER -

Structure and mechanical properties of Ni-Cu-Ti-Zr composite materials with amorphous phase

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this