Structure and magnetic properties of amorphous and nanocrystalline Fe 40Co40Cu0.5Zr9Al2Si 4B4.5 alloys

A. Mitra, H. Y. Kim, D. V. Louzguine, N. Nishiyama, B. Shen, A. Inoue

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

Crystallisation behaviour and magnetic properties of as-spun and annealed Fe40Co40Cu0.5Zr9Al 2Si4B4.5 alloy have been studied. The annealing was performed at 873K for 15min. XRD and TEM studies shows the formation of nanocrystalline α-(Fe,Co)(SiAl) particles with 7.5±2nm in diameter dispersed in an amorphous matrix. The Curie temperature of the as-spun amorphous ribbon is 736K. Saturation magnetisation of the annealed sample decreases at a rate of 0.5emu/g/K in the measured temperature range of 300-1000K. Excellent room temperature AC magnetic properties are achieved for the nanocrystalline sample. The low value of the imaginary part of the permeability and the high cut-off frequency (20kHz) suggest that the eddy current contribution in the annealed materials is low. The coercivity of the annealed sample remains almost constant at 95A/m up to the frequency of 20kHz. High saturation magnetisation, high Curie temperature and excellent soft magnetic properties in the nanocrystalline state suggests that Fe40Co40Cu 0.5Zr9Al2Si4B4.5 alloy is a strong candidate for high temperature magnetic application.

Original languageEnglish
Pages (from-to)299-305
Number of pages7
JournalJournal of Magnetism and Magnetic Materials
Volume278
Issue number3
DOIs
Publication statusPublished - 2004 Jul

Keywords

  • Fe-Co-based material
  • Magnetic properties
  • Nanocrystalline materials
  • Permeability
  • Power loss

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Structure and magnetic properties of amorphous and nanocrystalline Fe <sub>40</sub>Co<sub>40</sub>Cu<sub>0.5</sub>Zr<sub>9</sub>Al<sub>2</sub>Si <sub>4</sub>B<sub>4.5</sub> alloys'. Together they form a unique fingerprint.

Cite this