Structural and electrochemical studies on thin film LiNi0.8Co0.2O2 by PLD for micro battery

R. Baskaran, Naoaki Kuwata, O. Kamishima, Junichi Kawamura, S. Selvasekarapandian

Research output: Contribution to journalArticlepeer-review

16 Citations (Scopus)

Abstract

Thin film of LiNi0.8Co0.2O2 (LNCO) has been prepared by Pulsed Laser Deposition (PLD) technique at various post annealing temperatures. XRD results of LNCO thin film deposited on both Pt and Si substrates reveal relatively good crystalline nature at 500 °C which is in good agreement with the electrochemical results. ICP-AES composition analysis indicates 10 to 5% Li loss in the post annealed (400-700 °C) LNCO/Pt thin films; however the as prepared LNCO/Pt films show 17% excess of Li which are comparable with the LNCO target results. SEM analysis indicates phase separation at 600 °C and porous nature at 700-800 °C for LNCO/Pt films. Cyclic voltammetry (CV) scans of LiNi0.8Co0.2O2 film post annealed at 500 °C show a pair of main cathodic and anodic peaks at 3.64 and 3.4 V, respectively with a narrow peak separation reveals good stability upon cycling. Whereas the LNCO films annealed at 600 °C and 700 °C indicate an additional anodic peak at lower potential besides a pair of major peaks which may be due to the phase separated morphology as evidenced from SEM analysis. Based on the structural and electrochemical results, a lithium-ion micro cell has been constructed with LNCO/Li3.4V0.6Si0.4O4(LVSO)/SnO configuration with the thickness of 1.535 μm and its electrochemical properties have been studied.

Original languageEnglish
Pages (from-to)636-643
Number of pages8
JournalSolid State Ionics
Volume180
Issue number6-8
DOIs
Publication statusPublished - 2009 May 14

Keywords

  • Electrochemical studies
  • Layered oxides
  • LiNiCoO
  • Micro battery
  • PLD

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Structural and electrochemical studies on thin film LiNi<sub>0.8</sub>Co<sub>0.2</sub>O<sub>2</sub> by PLD for micro battery'. Together they form a unique fingerprint.

Cite this