Structural and electrical characterization of dense lead zirconate titanate ceramics synthesized by the oxidant-peroxo wet-chemical route

Emerson R. Camargo; Flavio L. Souza; Edson R. Leite; Masato Kakihana

doi:10.1063/1.1765854

Structural and electrical characterization of dense lead zirconate titanate ceramics synthesized by the oxidant-peroxo wet-chemical route

Emerson R. Camargo, Flavio L. Souza, Edson R. Leite, Masato Kakihana

Center for Exploration of New Inorganic Materials

Research output: Contribution to journal › Article › peer-review

12 Citations (Scopus)

Abstract

Powders were synthesized by the oxidant-peroxo method (OPM) to obtain dense ceramics of lead zirconate titanate (PZT). The electrical properties were measured at 25 to 450° at different frequencies. Scanning electronic microscopy equipped with x-ray energy dispersive spectrometer was used to observe microstructures for chemical analysis. It was analyzed that tetragonal structure was found in sintered bodies and the apparent densities calculated 90%-94% of the theoretical density.

Original language	English
Pages (from-to)	2169-2172
Number of pages	4
Journal	Journal of Applied Physics
Volume	96
Issue number	4
DOIs	https://doi.org/10.1063/1.1765854
Publication status	Published - 2004 Aug 15

ASJC Scopus subject areas

Physics and Astronomy(all)

Access to Document

10.1063/1.1765854

Fingerprint Dive into the research topics of 'Structural and electrical characterization of dense lead zirconate titanate ceramics synthesized by the oxidant-peroxo wet-chemical route'. Together they form a unique fingerprint.

Cite this

@article{b213f90f87234104ad9baeb873d97df1,

title = "Structural and electrical characterization of dense lead zirconate titanate ceramics synthesized by the oxidant-peroxo wet-chemical route",

abstract = "Powders were synthesized by the oxidant-peroxo method (OPM) to obtain dense ceramics of lead zirconate titanate (PZT). The electrical properties were measured at 25 to 450° at different frequencies. Scanning electronic microscopy equipped with x-ray energy dispersive spectrometer was used to observe microstructures for chemical analysis. It was analyzed that tetragonal structure was found in sintered bodies and the apparent densities calculated 90%-94% of the theoretical density.",

author = "Camargo, {Emerson R.} and Souza, {Flavio L.} and Leite, {Edson R.} and Masato Kakihana",

note = "Funding Information: This study was supported by FAPESP and . Helpful discussion with F. M. Pontes is greatly appreciated.",

year = "2004",

month = aug,

day = "15",

doi = "10.1063/1.1765854",

language = "English",

volume = "96",

pages = "2169--2172",

journal = "Journal of Applied Physics",

issn = "0021-8979",

publisher = "American Institute of Physics Publising LLC",

number = "4",

}

TY - JOUR

T1 - Structural and electrical characterization of dense lead zirconate titanate ceramics synthesized by the oxidant-peroxo wet-chemical route

AU - Camargo, Emerson R.

AU - Souza, Flavio L.

AU - Leite, Edson R.

AU - Kakihana, Masato

N1 - Funding Information: This study was supported by FAPESP and . Helpful discussion with F. M. Pontes is greatly appreciated.

PY - 2004/8/15

Y1 - 2004/8/15

N2 - Powders were synthesized by the oxidant-peroxo method (OPM) to obtain dense ceramics of lead zirconate titanate (PZT). The electrical properties were measured at 25 to 450° at different frequencies. Scanning electronic microscopy equipped with x-ray energy dispersive spectrometer was used to observe microstructures for chemical analysis. It was analyzed that tetragonal structure was found in sintered bodies and the apparent densities calculated 90%-94% of the theoretical density.

AB - Powders were synthesized by the oxidant-peroxo method (OPM) to obtain dense ceramics of lead zirconate titanate (PZT). The electrical properties were measured at 25 to 450° at different frequencies. Scanning electronic microscopy equipped with x-ray energy dispersive spectrometer was used to observe microstructures for chemical analysis. It was analyzed that tetragonal structure was found in sintered bodies and the apparent densities calculated 90%-94% of the theoretical density.

UR - http://www.scopus.com/inward/record.url?scp=4344571668&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=4344571668&partnerID=8YFLogxK

U2 - 10.1063/1.1765854

DO - 10.1063/1.1765854

M3 - Article

AN - SCOPUS:4344571668

VL - 96

SP - 2169

EP - 2172

JO - Journal of Applied Physics

JF - Journal of Applied Physics

SN - 0021-8979

IS - 4

ER -