Spindle error motion measurement of a large precision roll lathe

Jungchul Lee, Wei Gao, Yuki Shimizu, Jooho Hwang, Jeong Seok Oh, Chun Hong Park

Research output: Contribution to journalArticlepeer-review

15 Citations (Scopus)

Abstract

This paper describes a spindle error motion measurement system to evaluate the performance of the spindle of a large precision roll lathe, which is under development for fabrication of large-scale roll dies of micro-structured surfaces. The measurement system employed a large-scale roll work piece with a diameter of 320 mm and a length of 1800 mm as a measurement artifact instead of a master object to figure out the spindle error motion over the entire fabrication length. To separate the spindle error motion and the out-of-roundness of the roll work piece, the reversal method was employed. Two capacitive type displacement probes were mounted on the designed probe holders which were arranged to be faced to each other with the roll work piece between them. Spindle error motion measurement was conducted at several sections of the roll work piece along the roll axis to verify the tilt error motion of the spindle as well as the radial error motion. As the rotational speed was different for the mirror finishing fabrication of the roll work piece and fabrication of the micro-structures on the roll work piece, the spindle error motion was measured at rotational speeds of 5 and 300 rpm, respectively. Experimental results of the out-of-roundness of the roll work piece as well as the spindle error motion measurement are presented in this paper.

Original languageEnglish
Pages (from-to)861-867
Number of pages7
JournalInternational Journal of Precision Engineering and Manufacturing
Volume13
Issue number6
DOIs
Publication statusPublished - 2012 Jun

Keywords

  • Error separation
  • Measurement
  • Precision lathe
  • Roll
  • Spindle error motion

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Spindle error motion measurement of a large precision roll lathe'. Together they form a unique fingerprint.

Cite this