Some superconducting characteristics of Nb3Al composite wires prepared by rapid-quenching process

K. Fukuda; G. Iwaki; F. Hosono; S. Sakai; Y. Iijima; T. Takeuchi; K. Inoue; N. Kobayashi; K. Watanabe; S. Awaji

doi:10.1109/77.620875

Some superconducting characteristics of Nb₃Al composite wires prepared by rapid-quenching process

K. Fukuda, G. Iwaki, F. Hosono, S. Sakai, Y. Iijima, T. Takeuchi, K. Inoue, N. Kobayashi, K. Watanabe, S. Awaji

High Field Laboratory for Superconducting Materials

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Abstract

Multifilamentary Nb₃Al superconducting wires for high field magnets above 20T have been developed by a rapid-quenching process. A wire of long length was fabricated. A coil was fabricated using the wire. J_c of this wire was 195A/mm² at 20T,4.2K and 486A/mm² at 20T,1.8K, B_c2 of the coil was 24.6T at 4.2K and 26.9T at 1.8K and the T_c was 17.8K. In addition, to investigate stability the RRR was measured, the value was 16.9. Scattering of the J_c in the longitudinal direction was examined and found to be within ± 10%.

Original language	English
Pages (from-to)	1572-1575
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	7
Issue number	2 PART 2
DOIs	https://doi.org/10.1109/77.620875
Publication status	Published - 1997

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/77.620875

Cite this

Some superconducting characteristics of Nb₃Al composite wires prepared by rapid-quenching process. / Fukuda, K.; Iwaki, G.; Hosono, F.; Sakai, S.; Iijima, Y.; Takeuchi, T.; Inoue, K.; Kobayashi, N.; Watanabe, K.; Awaji, S.

In: IEEE Transactions on Applied Superconductivity, Vol. 7, No. 2 PART 2, 1997, p. 1572-1575.

Research output: Contribution to journal › Article › peer-review

@article{731053fa44a04bf383a31ddc0b8d58b2,

title = "Some superconducting characteristics of Nb3Al composite wires prepared by rapid-quenching process",

abstract = "Multifilamentary Nb3Al superconducting wires for high field magnets above 20T have been developed by a rapid-quenching process. A wire of long length was fabricated. A coil was fabricated using the wire. Jc of this wire was 195A/mm2 at 20T,4.2K and 486A/mm2 at 20T,1.8K, Bc2 of the coil was 24.6T at 4.2K and 26.9T at 1.8K and the Tc was 17.8K. In addition, to investigate stability the RRR was measured, the value was 16.9. Scattering of the Jc in the longitudinal direction was examined and found to be within ± 10%.",

author = "K. Fukuda and G. Iwaki and F. Hosono and S. Sakai and Y. Iijima and T. Takeuchi and K. Inoue and N. Kobayashi and K. Watanabe and S. Awaji",

year = "1997",

doi = "10.1109/77.620875",

language = "English",

volume = "7",

pages = "1572--1575",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2 PART 2",

}

TY - JOUR

T1 - Some superconducting characteristics of Nb3Al composite wires prepared by rapid-quenching process

AU - Fukuda, K.

AU - Iwaki, G.

AU - Hosono, F.

AU - Sakai, S.

AU - Iijima, Y.

AU - Takeuchi, T.

AU - Inoue, K.

AU - Kobayashi, N.

AU - Watanabe, K.

AU - Awaji, S.

PY - 1997

Y1 - 1997

N2 - Multifilamentary Nb3Al superconducting wires for high field magnets above 20T have been developed by a rapid-quenching process. A wire of long length was fabricated. A coil was fabricated using the wire. Jc of this wire was 195A/mm2 at 20T,4.2K and 486A/mm2 at 20T,1.8K, Bc2 of the coil was 24.6T at 4.2K and 26.9T at 1.8K and the Tc was 17.8K. In addition, to investigate stability the RRR was measured, the value was 16.9. Scattering of the Jc in the longitudinal direction was examined and found to be within ± 10%.

AB - Multifilamentary Nb3Al superconducting wires for high field magnets above 20T have been developed by a rapid-quenching process. A wire of long length was fabricated. A coil was fabricated using the wire. Jc of this wire was 195A/mm2 at 20T,4.2K and 486A/mm2 at 20T,1.8K, Bc2 of the coil was 24.6T at 4.2K and 26.9T at 1.8K and the Tc was 17.8K. In addition, to investigate stability the RRR was measured, the value was 16.9. Scattering of the Jc in the longitudinal direction was examined and found to be within ± 10%.

UR - http://www.scopus.com/inward/record.url?scp=0031163385&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0031163385&partnerID=8YFLogxK

U2 - 10.1109/77.620875

DO - 10.1109/77.620875

M3 - Article

AN - SCOPUS:0031163385

VL - 7

SP - 1572

EP - 1575

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 2 PART 2

ER -

Some superconducting characteristics of Nb₃Al composite wires prepared by rapid-quenching process

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this