Solder-joint inspection using dry-contact ultrasonic device

Hironori Tohmyoh, Masumi Saka

Research output: Contribution to journalConference articlepeer-review

Abstract

A dry-contact ultrasonic device is developed for inspection of solder joints. The device nables us to inspect packages in a non-wetting manner by the aid of the interface formed by inserting a plastic film between water and the package. The jointing points in a wafer level package, which contained open circuit between the metal posts and the solder balls, was imaged by the device. The open points were detected clearly, and effective transmission of higher frequency ultrasound over the immersion device was achieved, where the inserted film performed as an acoustic matching layer. It was confirmed by both theoretical calculation and the experiment that the device realizes high lateral resolution similarly to the immersion one.

Original languageEnglish
Pages (from-to)819-822
Number of pages4
JournalProceedings of the IEEE Ultrasonics Symposium
Volume1
Publication statusPublished - 2002 Dec 1
Event2002 IEEE Ultrasonics Symposium - Munich, Germany
Duration: 2002 Oct 82002 Oct 11

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

Fingerprint Dive into the research topics of 'Solder-joint inspection using dry-contact ultrasonic device'. Together they form a unique fingerprint.

Cite this