Soft magnetic FeSiBPCu heteroamorphous alloys with high Fe content

Akihiro Makino, He Men, Kunio Yubuta, Takeshi Kubota

Research output: Contribution to journalArticlepeer-review

54 Citations (Scopus)

Abstract

Fe-Si-B amorphous alloys with less than 80 at. % Fe are now in practical use because of their excellent magnetic softness and rather high magnetization (Js) basically owing to the lack of intrinsic magnetic anisotropy and the high Fe content, respectively. A strict upper limit of the Fe content (about 80 at. %) for the formation of a single amorphous phase with good magnetic softness hinders the improvement in Js of the Fe-based amorphous alloys. The alloys with the high Fe content exceeding the limit commonly have the as-quenched structure consisting of coarse α-Fe grains in an amorphous matrix, which inevitably results in inferior magnetic softness. The simultaneous addition of proper amounts of P and Cu is found to be significantly effective in decreasing the grain size of α-Fe phase, formed in an amorphous matrix in the as-quenched Fe82Si9B 9 amorphous alloys with high Fe content exceeding the limit. Fe-rich Fe81.7Si9B7P2Cu0.3 heteroamorphous alloy with an as-quenched structure consisting of extremely small α-Fe -like clusters of about 3 nm or smaller in diameter, randomly dispersed within the amorphous matrix, exhibits the lower coercivity of 7 A m-1 and the higher Js of 1.56 T than the typical Fe-based monolithic amorphous alloy at an as-quenched state.

Original languageEnglish
Article number013922
JournalJournal of Applied Physics
Volume105
Issue number1
DOIs
Publication statusPublished - 2009 Jul 9

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Soft magnetic FeSiBPCu heteroamorphous alloys with high Fe content'. Together they form a unique fingerprint.

Cite this