Simulation of operational power of co-axial double rotating cylinders mill by particle element method

Miyuki Miyazaki, Junya Kano, Fumio Saito

Research output: Contribution to journalArticlepeer-review

2 Citations (Scopus)

Abstract

The operational power of a co-axial double rotating cylinders mill with blades is estimated on the basis of the balls motion simulated by the Particle Element Method (PEM). The boundary condition on the rotating blades is introduced to simulate the balls motion. The estimated mill power is calculated from the balls motion in the divided working space to save simulating time. The actual and estimated power data tend to increase as rotational speed becomes high, while they remain at a low value and are independent of the speed of the inner cylinder when the speed of the outer cylinder is low. Both power data decrease at high rotational speed due to the rolling motion of the media balls, and the estimated power is in fairly good agreement with the actual one. It is confirmed that the boundary condition introduced in the present paper is suitable and applicable for estimating the operational power, as well as the balls motion in a rotational media mill with complex configuration in the working space.

Original languageEnglish
Pages (from-to)257-261
Number of pages5
JournalJOURNAL of CHEMICAL ENGINEERING of JAPAN
Volume32
Issue number3
DOIs
Publication statusPublished - 1999 Jan 1

Keywords

  • Co-Axial Double Rotating Cylinders Mill
  • Grinding
  • Media Motion
  • Mill Power
  • Particle Element Method
  • Simulation

ASJC Scopus subject areas

  • Chemistry(all)
  • Chemical Engineering(all)

Fingerprint Dive into the research topics of 'Simulation of operational power of co-axial double rotating cylinders mill by particle element method'. Together they form a unique fingerprint.

Cite this