Shear-lag versus finite element models for stress transfer in fiber-reinforced composites

Z. Xia, T. Okabe, W. A. Curtin

Research output: Contribution to journalArticlepeer-review

86 Citations (Scopus)

Abstract

The stress transfer from broken to unbroken fibers in fiber-reinforced polymer-matrix (PMC) and aluminum-matrix (AMC) composites is studied using a detailed 3D finite element model (FEM) and using the standard shear-lag model (SLM). The stress transfer predicted by the SLM is in good agreement with the FEM results for the PMC at high fiber volume fractions but not at low volume fractions. For the AMC with an elastic/plastic matrix, the FEM results depend on whether the fiber is broken initially (pre-break) or after loading (post-break), while the SLM is independent of the fiber break load. Compared to the pre-break FEM, the stress transfer in the SLM is too low at high volume fractions and fairly accurate at low volume fractions while the reverse trend obtains when the SLM is compared to the post-break FEM. These results suggest that the SLM is generally accurate for high fiber/matrix stiffness ratios and high fiber volume fractions, and/or when global matrix yielding proceeds fiber breaking such that the tangent stiffness of the matrix is small. At low volume fractions, matrix load carrying capacity accounts for much of the discrepancy between the SLM and the FEM, which can be rectified by more sophisticated SLMs. A simple elastic model demonstrates that neglect of the finite fiber dimensions and fiber shear deformation in the SLM can also affect the stress transfer. It is concluded that although the standard SLM cannot generally be used for simulations of composite deformation and failure, it is reasonably accurate for an important range of composite constituent material properties.

Original languageEnglish
Pages (from-to)1141-1149
Number of pages9
JournalComposites Science and Technology
Volume62
Issue number9
DOIs
Publication statusPublished - 2002 Jul
Externally publishedYes

Keywords

  • A. Polymer matrix composites (PMC's)
  • Shear-lag model (SLM)

ASJC Scopus subject areas

  • Ceramics and Composites
  • Engineering(all)

Fingerprint Dive into the research topics of 'Shear-lag versus finite element models for stress transfer in fiber-reinforced composites'. Together they form a unique fingerprint.

Cite this