Rust preventive properties by using polarization curve measurement on the metal coated with the rust preventive oil

Daisuke Iwashima, Sayaka Hirata, Naoki Nagase, Masahiko Hatakeyama, Satoshi Sunada

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Fe-Cu-C sintered steels are widely used as powder materials, because of its small volumetric shrinkage. However, Cu, which acts as cathode enhance formation of rust (Fe2O3·xH2O) during fabrication. To prevent formation of Fe2O3·xH2O rust preventive oils are genially used. Therefore, it is necessary to develop new rust preventive oils with contradictory properties of low viscosity and superior rust prevention. In this study, we developed technique to quantitatively evaluate rust prevention ability by measuring polarization curve through thin corrosive solution on Fe-Cu-C sintered steels coated with rust preventive oils. Polarization curves were registered after 30 min of exposure to test solution in order to allow corrosion potential (Ecorr) stabilization. From the experimental, it is possible to evaluate the corrosion rate quantitatively in the surface of specimen, which was coated with rust preventive oil through thin corrosive solution. The measurement results suggest the anodic reaction is decreased with oils.

Original languageEnglish
Pages (from-to)1762-1764
Number of pages3
JournalMaterials Transactions
Volume55
Issue number11
DOIs
Publication statusPublished - 2014

Keywords

  • Electrochemical measurement
  • Polarization curve
  • Rust preventive performance
  • Sintered material

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanical Engineering
  • Mechanics of Materials

Fingerprint Dive into the research topics of 'Rust preventive properties by using polarization curve measurement on the metal coated with the rust preventive oil'. Together they form a unique fingerprint.

  • Cite this