Room-temperature ductility of Ti-6Al-4V alloy with α' martensite microstructure

Hiroaki Matsumoto, Hiroshi Yoneda, Kazuhisa Sato, Shingo Kurosu, Eric Maire, Damien Fabregue, Toyohiko J. Konno, Akihiko Chiba

Research output: Contribution to journalArticlepeer-review

79 Citations (Scopus)

Abstract

The microstructures, cold-rolling abilities, and mechanical properties of a Ti-6Al-4V alloy with a α' microstructure were examined, and compared with these properties in alloys with the (α + β) microstructure. The microstructure of a Ti-6Al-4V alloy solution treated at 1373. K followed by quenching (referred to as 1373. K STQ in the following) exhibits the acicular α' martensite microstructure. The alloy exhibits the (equilibrium α + α' martensite) bimodal microstructure when 1223. K solution treatment is carried out followed by quenching (referred to as 1223. K STQ). In contrast, Ti-6Al-4V alloys heat treated at 1373. K or 1223. K, followed by furnace cooling (referred to as 1373. K ST-FC and 1223. K ST-FC), exhibit a lamellar (α + β) microstructure and an equiaxed (α + β) microstructure, respectively. The strength of the STQ specimens was found to be higher than that of the ST-FC specimens. The 1223. K STQ specimen had excellent cold-rolling ability (more than 40% reduction) and higher tensile ductility than those of the ST-FC specimens. The excellent ductility of 1223. K STQ is thought to be due to the constituent phase of the single HCP phase (α' and α) and the fine equiaxed bimodal morphology. The compositional distribution of the V content enrichment and the decrease in the Al content in the α' martensitic region during solution treatment at 1223. K should contribute to the excellent ductility. This work therefore suggests a useful method for improving room-temperature ductility by using industrial Ti-6Al-4V alloys with the α' martensite microstructure.

Original languageEnglish
Pages (from-to)1512-1520
Number of pages9
JournalMaterials Science and Engineering A
Volume528
Issue number3
DOIs
Publication statusPublished - 2011 Jan 25

Keywords

  • Alpha prime martensite
  • Ductility
  • Fracture behavior
  • Titanium alloys

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Room-temperature ductility of Ti-6Al-4V alloy with α' martensite microstructure'. Together they form a unique fingerprint.

Cite this