Rollable Polymer-Stabilized Ferroelectric Liquid Crystal Device Using Thin Plastic Substrates

Hiroto Sato, Hideo Fujikake, Hiroshi Kikuchi, Taiichiro Kurita

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

We developed a rollable polymer-stabilized ferroelectric liquid crystal (FLC) display device using thin plastic substrates. In a device using 200-μm-thick substrates which are fastened by polymer walls and networks made by photopolymerization-induced phase separation, disorder of the FLC alignment was caused by exfoliation of these walls in curvature radii of under 30 mm. Otherwise, the uniformity of the FLC alignment was maintained even after a device using 100-μm-thick substrates was bent at a radius of 7 mm. The enhanced bending tolerance does not depend on the FLC alignment direction, and the device could be bent both convexly and concavely without any FLC alignment change. A rollable device with a size of 100 × 100 mm exhibited uniform grayscale display operation between crossed polarizers when bent with a radius of 15 mm.

Original languageEnglish
Pages (from-to)352-356
Number of pages5
JournalOptical Review
Volume10
Issue number5
DOIs
Publication statusPublished - 2003 Jan 1
Externally publishedYes

Keywords

  • Ferroelectric liquid crystal
  • Plastic substrate
  • Polymer network
  • Polymer wall
  • Rollable display

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

Fingerprint Dive into the research topics of 'Rollable Polymer-Stabilized Ferroelectric Liquid Crystal Device Using Thin Plastic Substrates'. Together they form a unique fingerprint.

Cite this