Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures

K. Shibata, T. Ogata, A. Nyilas, R. P. Walsh, M. F. Millet, Y. Shindo, H. Fujii, K. Ishio, H. Nakajima, H. Mitterbacher, V. J. Toplosky, S. Ohmiya, K. Takano, P. Gigante

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Ogata et al. reported in 1996 results of international Round Robin tests on mechanical property measurement of several metals at cryogenic temperatures. Following the report, the standard deviation of Young's modulus of 316L steel is much larger than those of yield and tensile strengths, that is, 4.6 % of the mean value for Young's modulus, while 1.4 % and 1.6 % of the mean values for yield and for tensile strengths, respectively. Therefore, an international Round Robin test on Young's modulus of two austenitic stainless steels at cryogenic temperatures under the participation often institutes from four nations has been initiated within these two years. As a result, the ratios of standard deviation to the mean values are 4.2 % for 304L and 3.6 % for 316L. Such a drop in the standard deviation is attributable to the decrease in the number of institute owing to the application of single extensometer or direct strain gage technique.

Original languageEnglish
Title of host publicationADVANCES IN CRYOGENIC ENGINEERING
Subtitle of host publicationTransactions of the International Cryogenic Materials Conference, ICMC, Volume 52A
Pages91-98
Number of pages8
DOIs
Publication statusPublished - 2006 Mar 31
EventADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC - Keystone, CO, United States
Duration: 2005 Aug 292005 Sep 2

Publication series

NameAIP Conference Proceedings
Volume824 I
ISSN (Print)0094-243X
ISSN (Electronic)1551-7616

Other

OtherADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC
CountryUnited States
CityKeystone, CO
Period05/8/2905/9/2

Keywords

  • Cryogenic temperatures
  • Round robin test
  • Stainless steel
  • Young's modulus

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures'. Together they form a unique fingerprint.

  • Cite this

    Shibata, K., Ogata, T., Nyilas, A., Walsh, R. P., Millet, M. F., Shindo, Y., Fujii, H., Ishio, K., Nakajima, H., Mitterbacher, H., Toplosky, V. J., Ohmiya, S., Takano, K., & Gigante, P. (2006). Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures. In ADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC, Volume 52A (pp. 91-98). (AIP Conference Proceedings; Vol. 824 I). https://doi.org/10.1063/1.2192338