Resonance Analysis of a Permeance Meter Using a Figure-of-Eight Coil

M. Yamaguchi, T. Kawazu, K. I. Arai

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

We derived an equivalent circuit for a figure-8 coil type permeance meter in order to analyze its LC resonance characteristics. The equivalent circuit for the pickup coils was derived by using the same analytical techniques as for thin-film inductors. The driving sheets and twisted lead wires were modeled according to the theory of distributed constant networks. We made a permeance meter, measured the frequency characteristics of the impedance for the coils, and confirmed the validity of the equivalent circuit. After describing the above steps, we discuss the LC resonance caused by the stray capacitance between the pickup coils and the driving sheets.

Original languageEnglish
Pages (from-to)43-48
Number of pages6
JournalIEEE Translation Journal on Magnetics in Japan
Volume9
Issue number2
DOIs
Publication statusPublished - 1994 Jan 1

ASJC Scopus subject areas

  • Engineering (miscellaneous)
  • Engineering(all)

Fingerprint Dive into the research topics of 'Resonance Analysis of a Permeance Meter Using a Figure-of-Eight Coil'. Together they form a unique fingerprint.

Cite this