Resistivity and morphology of TiSi2 formed on Xe +-implanted polycrystalline silicon

Hiroki Kuwano, J. R. Phillips, J. W. Mayer

Research output: Contribution to journalArticlepeer-review

30 Citations (Scopus)


Xe ion irradiation of polycrystalline silicon before Ti deposition is found to affect subsequent silicide formation. Silicide films were prepared by implanting 60, 100, or 240 keV Xe+ ions into 500-nm-thick undoped polycrystalline silicon before depositing Ti and annealing in vacuum. Preimplantation altered the subsequent silicide resistivity, x-ray diffraction patterns, and morphology as compared to films prepared on unimplanted polycrystalline Si substrates. We found that minimal TiSi2 resistivities were achieved at lower temperatures with preimplantation, indicating that the Xe-implanted substrate promotes a lower temperature transition from the metastable C49 phase to the low-resistivity equilibrium C54 phase of TiSi2. X-ray diffraction results confirmed the lower temperature formation of the C54 phase with preimplantation. Low-temperature annealing (650°C, 30 min) of 6×1016 cm -2, 240 keV Xe+-implanted samples yielded low-resistivity (∼22 μΩ cm) silicide films, while simultaneously annealed samples without preimplantation had resistivity five times higher. Lower doses were effective at lower implant energies, with low resistivity achieved after 725°C, 30 min annealing for 2×101 5 cm-2, 60 keV Xe+ preimplantation.

Original languageEnglish
Pages (from-to)440-442
Number of pages3
JournalApplied Physics Letters
Issue number5
Publication statusPublished - 1990
Externally publishedYes

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)


Dive into the research topics of 'Resistivity and morphology of TiSi2 formed on Xe +-implanted polycrystalline silicon'. Together they form a unique fingerprint.

Cite this