Repairing damage on ground fused silica by CO2 laser irradiation

Peng Yao, Takuro Abe, Nobuhito Yoshihara, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Abstract

Fused silica is an important material for optics of ultraviolet laser transmission. It is difficult to be ground in ductile mode because of a high brittleness. In this paper, ductile mode grinding was achieved by a taper grinding method when the initial surface was a polished surface. However, when the initial surface was an unpolished surface, ductile mode grinding could not be realized because of the existence of surface and subsurface damages. The damages on the ground fused silica surface were repaired by CO2 laser irradiation with optimal laser power and scanning velocity. The optimal parameters were determined by studying the viscosity of fused silica and etching depth of laser irradiated groove. Besides laser processing parameters, surface roughness of laser irradiated surface is also greatly influenced by the initial surface roughness

Original languageEnglish
Title of host publicationAdvances in Abrasive Technology XIII
Pages401-406
Number of pages6
DOIs
Publication statusPublished - 2010
Event13th International Symposium on Advances in Abrasive Technology, ISAAT2010 - Taipei, Taiwan, Province of China
Duration: 2010 Sep 192010 Sep 22

Publication series

NameAdvanced Materials Research
Volume126-128
ISSN (Print)1022-6680

Other

Other13th International Symposium on Advances in Abrasive Technology, ISAAT2010
CountryTaiwan, Province of China
CityTaipei
Period10/9/1910/9/22

Keywords

  • Brittle mode
  • CO laser irradiation
  • Ductile mode
  • Fused silica
  • Subsurface damage

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Repairing damage on ground fused silica by CO<sub>2</sub> laser irradiation'. Together they form a unique fingerprint.

  • Cite this

    Yao, P., Abe, T., Yoshihara, N., Zhou, T., Yan, J., & Kuriyagawa, T. (2010). Repairing damage on ground fused silica by CO2 laser irradiation. In Advances in Abrasive Technology XIII (pp. 401-406). (Advanced Materials Research; Vol. 126-128). https://doi.org/10.4028/www.scientific.net/AMR.126-128.401