Reliability analysis of solderless press-fit interconnections

Hironori Tohmyoh, Kiichiro Yamanobe, Masumi Saka, Jiro Utsunomiya, Takeshi Nakamura, Yoshikatsu Nakano

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper treats typical mechanical problems met in a solderless press-fit assembly. First, the elastic-plastic properties of a pin and the friction coefficient of the pin in thin plated through hole (TH) are determined by the experiments and the three-dimensional finite element (FE) analysis. The elasticplastic properties of the press-fit pin are determined by the small scale three-point bending. The friction coefficient of the pin in the TH is successfully determined from the load-displacement relationship of the pin during press-fit assembly. The validity of the determined parameters is to be clarified by conducting the press-fit assemblies into the holes with different diameters. By comparing the damaged area of the printed circuit boards after assembly and the stress distributions obtained numerically, the failure stress of the board is determined. Finally, both the retention force of the pin and the damage of the printed circuit board after assembly become possible to be predicted by the numerical analysis.

Original languageEnglish
Title of host publication2007 Proceedings of the ASME InterPack Conference, IPACK 2007
Pages611-615
Number of pages5
DOIs
Publication statusPublished - 2007 Dec 1
EventASME Electronic and Photonics Packaging Division - Vancouver, BC, United States
Duration: 2007 Jul 82007 Jul 12

Publication series

Name2007 Proceedings of the ASME InterPack Conference, IPACK 2007
Volume2

Other

OtherASME Electronic and Photonics Packaging Division
CountryUnited States
CityVancouver, BC
Period07/7/807/7/12

ASJC Scopus subject areas

  • Computer Networks and Communications
  • Computer Science Applications
  • Information Systems

Fingerprint Dive into the research topics of 'Reliability analysis of solderless press-fit interconnections'. Together they form a unique fingerprint.

  • Cite this

    Tohmyoh, H., Yamanobe, K., Saka, M., Utsunomiya, J., Nakamura, T., & Nakano, Y. (2007). Reliability analysis of solderless press-fit interconnections. In 2007 Proceedings of the ASME InterPack Conference, IPACK 2007 (pp. 611-615). (2007 Proceedings of the ASME InterPack Conference, IPACK 2007; Vol. 2). https://doi.org/10.1115/IPACK2007-33264