TY - JOUR
T1 - Readout ASIC of pair-monitor for international linear collider
AU - Sato, Yutaro
AU - Ikeda, Hirokazu
AU - Ito, Kazutoshi
AU - Miyamoto, Akiya
AU - Nagamine, Tadashi
AU - Sasaki, Rei
AU - Takubo, Yosuke
AU - Tauchi, Toshiaki
AU - Yamamoto, Hitoshi
N1 - Funding Information:
The author would like to thank all the member of the FCAL collaboration [3] for all their help. This study is supported in part by the Creative Scientific Research Grant (no. 18GS0202) of the Japan Society for Promotion of Science and promotion of collaborative research programs in universities with KEK.
PY - 2010/11/1
Y1 - 2010/11/1
N2 - The pair-monitor is a beam profile monitor at the interaction point of the international linear collider. A prototype of the readout ASIC for the pair-monitor has been designed and tested. Since the pair-monitor uses the hit distribution of electrons and positrons generated by the beam-crossing to measure the beam profile, the readout ASIC is designed to count the number of hits. In a prototype ASIC, 36 readout cells were implemented by TSMC 0.25μm CMOS process. Each readout cell is equipped with an amplifier, comparator, 8-bit counter and 16 count-registers. By the operation test, all the ASIC component were confirmed to work correctly. As the next step, we develop the prototype ASIC with the silicon on insulator technology. It is produced with OKI 0.2μm FD-SOI CMOS process.
AB - The pair-monitor is a beam profile monitor at the interaction point of the international linear collider. A prototype of the readout ASIC for the pair-monitor has been designed and tested. Since the pair-monitor uses the hit distribution of electrons and positrons generated by the beam-crossing to measure the beam profile, the readout ASIC is designed to count the number of hits. In a prototype ASIC, 36 readout cells were implemented by TSMC 0.25μm CMOS process. Each readout cell is equipped with an amplifier, comparator, 8-bit counter and 16 count-registers. By the operation test, all the ASIC component were confirmed to work correctly. As the next step, we develop the prototype ASIC with the silicon on insulator technology. It is produced with OKI 0.2μm FD-SOI CMOS process.
KW - Beam profile
KW - ILC
KW - Pair-monitor
KW - Readout ASIC
KW - SOI
UR - http://www.scopus.com/inward/record.url?scp=77957838453&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=77957838453&partnerID=8YFLogxK
U2 - 10.1016/j.nima.2010.03.050
DO - 10.1016/j.nima.2010.03.050
M3 - Article
AN - SCOPUS:77957838453
SN - 0168-9002
VL - 623
SP - 501
EP - 503
JO - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
JF - Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
IS - 1
ER -