Rapid deposition of (K,Na)NbO3thick films using microwave-assisted hydrothermal technique

Hiroshi Uchida, Masaki Okura, Yoshiharu Ito, Takahisa Shiraishi, Takanori Kiguchi, Toyohiko J. Konno, Hiroshi Funakubo

Research output: Contribution to journalArticlepeer-review

Abstract

Rapid processing for hydrothermal deposition of (K,Na)NbO3 (KNN) thick films was proposed with the assistance of microwave (MW) heating, for short-time fabrication of ferroelectric/piezoelectric films with thicknesses of several micrometers within 1 h. MW irradiation raised the temperature of water medium up to 240 ?C within 10 min, whereas conventional heating using hot-air convection required more than 2 h. Epitaxial KNN films were successfully deposited on single-crystal substrates of (100)SrTiO3:Nb and (100)SrRuO3//(100)SrTiO3 at reaction temperature of 180 ?C-240 ?C within 1 h; especially, the films with thicknesses over 10 μm could be obtained on at 220 ?C for 40 min. The resulting film exhibited domain structure and dielectric/ferroelectric properties comparable with the KNN films derived from conventional hydrothermal deposition.

Original languageEnglish
Article numberSPPB02
JournalJapanese journal of applied physics
Volume59
Issue numberSP
DOIs
Publication statusPublished - 2020 Nov 1

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

Fingerprint Dive into the research topics of 'Rapid deposition of (K,Na)NbO<sub>3</sub>thick films using microwave-assisted hydrothermal technique'. Together they form a unique fingerprint.

Cite this