Pyro/piezo-electric energy converter based on ferroelectric material combined with thermo-mechanical switch

Takuya Saito, Yusuke Kawai, Takahito Ono

Research output: Contribution to journalArticlepeer-review

Abstract

A novel pyro/piezo-electric energy converter, which is based on pyroelectric and piezoelectric energy conversion caused by periodic temperature and pressure change of a ferroelectric material, is developed. A bulk lead-zirconate-titanate (PZT) ceramic is attached on a bimetal disk. This bimetal disk is placed between hot and cold sources, which causes reciprocatory motion between the hot and cold sources. The temperature of the PZT ceramic is periodically changed due to the heat transfer, which produces pyroelectric current. At the moment of the forward and reverse buckling, piezoelectric current due to deformation of PZT ceramic is also caused. Maximum output power of 2.1 nW is obtained with the reciprocation frequency of 1.6 Hz when temperature difference is 258°C. This converter can be driven at hot source temperature higher than Curie point of PZT ̃330°C.

Original languageEnglish
Pages (from-to)154-158
Number of pages5
JournalIEEJ Transactions on Sensors and Micromachines
Volume134
Issue number6
DOIs
Publication statusPublished - 2014

Keywords

  • Bimaterial structure
  • Energy harvesting
  • PZT
  • Piezoelectricity
  • Pyroelectricity
  • Thermoelectric converter

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Pyro/piezo-electric energy converter based on ferroelectric material combined with thermo-mechanical switch'. Together they form a unique fingerprint.

Cite this