Production of Ni-P amorphous alloy-coated bipolar plate for PEM fuel cell by electro-less plating

Sung Chul Kim, Shin Ichi Yamaura, Akihiro Makino, Akihisa Inoue

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

In this work, electro-less plating was adopted to produce a new metallic bipolar plate coated with amorphous alloy. The Ni-P amorphous alloy thin film was deposited on A1 plate with a bipolar plate flow field and its corrosion resistance and contact electrical resistance were measured. As results, it was found that the electro-less plated Ni-P amorphous thin film showed much lower corrosion resistance than the Ni-Cr-P-B metallic glass because of its lack of Cr content and also found that the Ni-P film showed lower contact electrical resistance than the stainless steel SUS316L plate. The electricity generation tests with the single cell having the Ni-P amorphous alloy-coated bipolar plates produced in this study revealed that the single cell with the Ni -P amorphous alloy-coated bipolar plates showed excellent I-V performance as well as the cell with the carbon bipolar plates after 39th repetition. However, the I-V performance degraded gradually and was found to be much lower than that with the carbon bipolar plates after 50th repetition. Then the long time durability tests for 24 h were also conducted at the constant current density of 200 mA.cm-2. It was found that the cell voltage of the single cell with the Ni-P amorphous alloy-coated bipolar plates decreased gradually with time.

Original languageEnglish
Pages (from-to)557-561
Number of pages5
JournalNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
Volume75
Issue number10
DOIs
Publication statusPublished - 2011 Oct

Keywords

  • Amorphous alby
  • Bipolar plate
  • Electro-less plating
  • Proton exchange membrane fuel cell

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanics of Materials
  • Metals and Alloys
  • Materials Chemistry

Fingerprint Dive into the research topics of 'Production of Ni-P amorphous alloy-coated bipolar plate for PEM fuel cell by electro-less plating'. Together they form a unique fingerprint.

Cite this